聪明文档网
最新最全的文档下载
当前位置：
首页> 汽车行业缩写
汽车行业缩写
时间：2018-01-24 下载该word文档
汽车行业常用缩写
AAR: Appearance Approval Report 外观批准报告
A/D/V: Analysis/Development/Validation 分析/开发/验证
A/D/V–DV: ADV Design Validation ADV设计验证
A/D/V P&R: Analysis/Development/Validation Plan and Report. This form is used to summarize the plan and results for validation testing. Additional information can be found in the GP-11 procedure. 分析/开发/验证计划和报告
A/D/V–PV: ADV Product Validation ADV产品验证
AIAG: Automotive Industries Action Group, an organization formed by General Motors, Ford and Daimler-Chrysler to develop common standards and expectations for automotive suppliers. 汽车工业行动集团
AP: Advance Purchasing 先期采购
APQP: Advanced Product Quality Planning 产品质量先期策划
APQP Project Plan: A one-page summary of the SGM APQP process that describes the tasks and the timeframe in which they occur. APQP项目策划
AQC: Attribute Quality Characteristic 属性质量特性
ASQE: Advanced Supplier Quality Engineer 先期供应商质量工程师
BIW: Body in White. Usually the bare metal shell of the body including doors and deck lid prior to paint and trim. 白车身
BOM: Bill of Materials 材料清单
BOP: Bill of Process 过程清单
Brownfield Site: An expansion of an existing facility. 扩建场地
CMM: Coordinate Measuring Machine 三坐标测试仪
Cpk: Capability Index for a stabile process 过程能力指数
CTC: Component Timing Chart (DRE document 零部件时间表(DRE文件
CTS: Component Technical Specifications 零部件技术规范
CVER: Concept Vehicle Engineering Release 概念车工程发布
DC: Design Complete 设计完成
Defect outflow detection: A phrase used in the Supplier Quality Statement of Requirements that refers to in-process or subsequent inspection used to detect defects in parts. 缺陷检测
DFM/DFA: Design for Manufacturability / Design for Assembly 可制造性/可装配性设计
DFMEA: Design Failure Modes and Effects Analysis. It is used to identify the potential failure modes of a part, associated with the design, and establish a priority system for design improvements. 设计失效模式和后果分析
DPV: Defects per vehicle 每辆车缺陷数
DR: Documentation Required DR特性
DRE: Design Release Engineer 设计释放工程师
DV: Design Validation 设计验证
E&APSP: Engineering & Advance Purchasing Sourcing Process. 工程&先期采购定点程序
EP: E-Procurement 电子采购流程
Error Occurrence Prevention: A phrase used in the Supplier Quality Statement of Requirements that refers to poke yoke or error-proofing devices used to prevent errors in the manufacturing process from occurring. 防错
FTQ: First Time Quality 一次通过质量
GA: General Assembly 总装
GD&T: Geometric Dimensioning & Tolerancing 几何尺寸与公差
SGM: Shanghai General Motors 上海通用汽车
GMAP: General Motors Asian Pacific 通用汽车亚太
GME: General Motors Europe 通用汽车欧洲
GMNA: General Motors North American 通用汽车北美
GP: General Procedure 通用程序
GPDS: Global Product Description System 全球产品描述系统
GPS: Global Purchasing System 全球采购系统
GPSC: Global Purchasing & Supplier Chain 全球采购及供应链
GR&R: Gage Repeatability and Reproducibility 检具重复性及再现性
Greenfield Site: A new supplier facility that is built to support a program.
GVDP: Global Vehicle Development Process 全球整车开发流程
IPTV: Incidents per Thousand Vehicles 每千辆车故障
IVER: Integration Vehicle Engineering Release 集成车工程发布
KCC: Key Control Characteristics. It is a process characteristic where variation can affect the final part and/or the performance of the part. 关键控制特性
KCDS: Key Characteristic Designation System 关键特性指示系统
Kick-Off Meeting: The first APQP supplier program review. 启动会议(第一次APQP供应商项目评审
KPC: Key Product Characteristic. It is a product characteristic for which reasonably anticipated variation could significantly affect safety, compliance to governmental regulations, or customer satisfaction. 关键产品特性
LAAM: (General Motors Latin American, Africa & Meddle East